Results 1-25 of 29

EDCO Grinding Equipment

	EDCO Steel Cutter Teeth for CPM-8 Scarifier Replace worn out steel cutter teeth with this 2", 12 point cutter wheel. Our price: $1.99
Qty:

	EDCO Carbide Cutter Teeth for CPM-8 Scarifier Replaces worn out carbide cutter teeth. Our price: $8.65
Qty:

	EDCO 18820 9 Point Carbide Bit For CD-5 Scabbler This 9 point carbide scabbler bit works at a depth up to 1/8" and is intended for use with Edco model CD-5 scabbler. Our price: $115.00
Qty:

	EDCO Steel Cutter Head Kit For CPM-8 Scarifier A steel cutter head kit that is designed for use with the CMP-8 gas concrete and asphalt scarifier. Our price: $225.00
Qty:

	EDCO 64550 Outrigger Wheel Assembly For CPU-10FC An optional outrigger axle assembly for use with EDCO 10" self propelled scarifiers. Our price: $250.00
Qty:

	EDCO A105 Strip-Sert Grinder Startup Pack 5 Remove mastics and epoxies from concrete with this set of 3 carbide strips. Capable of removing mastics, paints, resins, tar and more from concrete surfaces! Our price: $295.00
Qty:

EDCO 10" Segmented Silver Economy Grinder Disc

Standard, 10" diameter, segmented grinding discs built for EDCO turbo grinders. Choose between the 10 and 20 segment disc.
Our price: $199.00 – $405.00

Model Type:

Qty:

	EDCO A211 Carbide Cutter Start Up Pack For CPM-4 And CPM-8 Get your scarifier ready for smooth, efficient milling of concrete and asphalt with this carbide cutter start up kit. Our price: $475.00
Qty:

	EDCO A103 Dyma-Sert Grinder Start Up Pack 3 Improve grinding speeds and remove touch coatings with this set of 3 diamond segmented dyma serts. Our price: $480.00
Qty:

	EDCO A106 Strip-Sert Grinder Start Up Pack 6 A set of 6 carbide strip serts that are designed to remove mastics and epoxies from concrete. capable of removing mastics, paints, resins, and more. Our price: $585.00
Qty:

	EDCO 26020 48-Pin Cutters For use with the Edco TLR-7 Traffic Line Remover. Our price: $705.00
Qty:

	EDCO A101 Dyma-Sert Grinder Start Up Pack 1 A set of 6 diamond segmented dyma serts that are designed to improve grinding speed and remove tough coatings. Our price: $985.00
Qty:

	EDCO Carbide Cutter Head Kit For CPM-8 Scarifier A carbide cutter head kit that is designed for use with the CMP-8 gas concrete and asphalt scarifier. Our price: $1,150.00
Qty:

	EDCO A207 6-Shaft Carbide Cutter Start Up Pack For CPM-10 This start up kit includes cutters, spacers and shafts and is designed for the Edco CPM-10 10" Push Scarifier. Our price: $1,505.00
Qty:

EDCO TMC-7 7" Turbo Edge Grinder

A 7" diameter concrete floor grinder that will work to within 1/4" of vertical surfaces. Choose between a gasoline engine and an electric motor.
Our price: $2,100.00

Model Type:

Qty:

	EDCO CPM-8 Electric Walk Behind Scarifier An electrically driven scarifier with a 8" working width that can cover 350 to 500 sq. ft. an hour at a depth of 1/8" per pass. Our price: $2,989.00
Qty:

	EDCO CPM-4 1.5 HP Electric Walk Behind Scarifier Easily remove traffic lines from warehouse floors with this 1.5 hp electric scarifier featuring a working width of 4". Our price: $3,085.00
Qty:

	EDCO CPM-4 Gas Powered Concrete & Asphalt Scarifier A 4" working width and the ability to grind within 3/4" of vertical surfaces make this gas powered scarifier especially effective as an edger. Our price: $3,085.00
Qty:

	EDCO CPM-8 Gas Concrete & Asphalt Scarifier The Honda engine is mounted directly over the scarifier drum to improve surface contact and decrease vibrations. Supports dust recovery systems and is equipped with a water misting system. Our price: $3,399.00
Qty:

	EDCO TG-10 10" Electric Turbo Grinder Remove coatings from rough concrete surfaces with this 5 hp electric floor grinder that will cover up to 750 sq. ft. of flooring per hour. Our price: $3,440.00
Qty:

	EDCO CPM-10 Electric Walk Behind Scarifier This electrically driven scarifier features a 10" working width and can cover 450 to 600 sq. ft. an hour at a depth of 1/8" per pass. Our price: $3,465.00
Qty:

EDCO 2EC Dual Disc Electric Floor Grinder

Handle up to 500 sq. ft. per hour with this electric floor grinder. Available in a 1-1/2 or 3 hp version. Equipped with counter rotating dual heads, capable of covering more area.
Our price: $3,650.00 – $3,985.00

Model Type:

Qty:

	EDCO CPM-10 10" Push Scarifier Featuring a 10" wide cut and a powerful 13 hp Honda motor. Ideal for production scarifying, repairing trip hazards, and more! Our price: $4,150.00
Qty:

	EDCO CD-3 Air Powered 3 Head Scabbler A 3 headed, air powered chip deck scabbler, excellent for resurfacing or removing dilapidated concrete and asphalt. Great for building wheelchair access ramps. Our price: $4,850.00
Qty:

	EDCO TLR-7 Traffic Line Remover Remove traffic lines easily from city streets, crosswalks and school safety zones. Fits into limited access areas, perfect for smaller spaces. Our price: $5,905.00
Qty:

Results 1-25 of 29